Ultrotherm

We offer a range of damp proofing services and solutions in Birmingham and throughout the West Midlands.

Call: 0333 577 306

Whatever your damp problem, we can help

Ultrotherm

Ultrotherm is supplied as convenient, flexible tiles that allow it to be installed around awkward shapes and curves. Ultrotherm tiles are simply stuck onto prepared walls using Ultrotherm Adhesive. Once applied, the Ultrotherm Tiles can simply be plastered over to create a wall surface ready for decoration

Protecting Against Condensation and Mould Growth

Mould growth caused by condensation is a major problem in the UK. The primary methods of preventing it are increasing the surface temperatures of walls and improving ventilation.

Installation of the Ultrotherm System increases the surface temperature of walls by insulating them – therefore reducing the risk of condensation. In most cases the installation of the Ultrotherm System will be enough to prevent condensation and mould growth. However it can also be used in conjunction with mould resistant paint and ventilation measures.

Ultrotherm System Components

  • Ultrotherm 12 mm thick tiles. Each tile measures 1000 × 500 mm. Supplied in packs of 10 (covering 5 m2)
  • Ultrotherm 8 mm thick reveal tiles (for insulating window and door reveals). Each tile measures 1000 × 230 mm. Supplied in packs of 5 (covering 1.15 m2)
  • Ultrotherm Adhesive. Used for bonding Ultrotherm tiles. Supplied in 10 kg tubs (covers up to 10 m2)
  • Ultrotherm Detail Adhesive. Used for bonding Ultrotherm trim beads and angle beads. Supplied in 300 ml tubes (covers up to 0.3 m2)
  • Ultrotherm Insulated Plastic Trim Beads. For use around window and door frames to reduce cold bridging. Also allows windows and doors to be replaced without damaging the insulation system. Supplied in 2.5 m lengths.
  • Ultrotherm Plastic Angle Beads. For use around all external angles. Supplied in 2.5 m lengths.
  • Dryzone System Mould-Resistant Emulsion Paint. High performance mould resistant emulsion paint recommended for use when decorating over the Ultrotherm System in rooms susceptible to condensation and mould growth. Supplied in 5 litre pails. 

Latest Projects

Coloured Wall Coating

French Grey wall coating was applied to this propoerty, lifting its appearance whilst ensuring it was appropriate to the neighbourhood

Damp Proof Injection

DPC injection is designed to seep into the mortar in order to prevent moisture from the ground rising up through the bricks

Silicone Render

Silicone render was applied to this property to add an extra layer of damp protection. Silicone render is damp proof

Contact Us

The Hive Efficiency Group Damp Proofing Ltd

13 The Courtyard,
Timothy Bridge Road, Stratford-Upon-Avon, CV37 9NP

Registered in England & Wales No: 13372392

Vat registration No: 391 5652 75

0333 577 3306

help@dampfree.net